Random good picture Not show

31. It is cruel of him to make the donkey carry such a heavy load.

32. This type of bearing is suitable for middle or low speed with heavy load condition. It is widely used for engineering machinery, vehicle, steel and iron and takeup machinery.

33. If a longer reclosing time is setting in a heavy load line, the system may swing after the trip without fault of remote breaker.

34. The minivan can not burden such heavy load of goods.

35. On a photo, a barefoot heaver with heavy load on the back is treading his tough way in the dank, miry, branches-and-bines-complected forest.

36. The main idea is aiming at that, under the channel condition of heavy load, stations produces the same backoff time and collides easily.

37. Takes quite a heavy load on himself offensively, particularly going on one.

38. In the case of heavy load when the advance ratio of propeller is small, the contraction of wake has large effect on the performance of the propeller.

39. It was not easy to carry such a heavy load, and during the dog days.

40. Adopt the totally enclosed type case so that distortion which happened under the condition of heavy load can be avoided.

41. 'You've got a heavy load on that sledge, ' said one of them 'Why don't you leave the tent here in Skagway?'

42. This product is suitable for all hydraulic system including the ordinary injection moulding machines and any hydraulic transmission system operated at high speed,[http://sentencedict.com/heavy load.html] heavy load and extreme temperatures.

43. This paper deals with the interchangeability of sawtooth thread used in unidirectional heavy load and the exact fit which apply the fit specific property by means of virtual pitch diameter.

44. With dreams deferred, can angry whites do what Langston Hughes taught us—to let it fester like a sore, even to let sag like a heavy load?

45. Is suitable for heavy load, high temperature shock dynamic intense mechanical equipment use, centralized lubrication system or gear box.

46. The heavy load of managing production was then placed on his shoulder.

47. HV and EHV transmission lines are equipped with split-phase breaker. If a longer reclosing time is setting in a heavy load line, the system may swing after the trip without fault of remote breaker.

48. This algorithm utilizes the overload capacity of the DC servo motor to improve dynamic performance of the robot joints under heavy load disturbances.

49. Self evaluation:I am low-keyed, pragmatic, full of energy, and can bear a heavy load of night shift for long time.

50. Based on a slotted non-persistent CSMA/CD protocol, a mathematical model suitable for assessing the performance of CSMA/CD protocol under heavy load has been developed.

51. marina, pontoon, passenger transport marina, fishing marina, piling dock, heavy load dock, caisson dock, engineering consulting, design, construction.

52. A waggoner was once driving a heavy load on a very muddy road.

53. Yacht marina, transport marina, travel marina, pontoon, passenger transport marina, fishing marina, piling dock, heavy load dock, caisson < ...

54. The steel and the heat treatment process of fine heavy load drift was determined by means of production tests. And the satisfactory result was obtained.

55. As a widely used LAN standard(IEEE802.4), token bus has many advantages such as no competitive conflict, good reliability, good real-time quality, being unacted on throughput in heavy load and so on.

56. The turntable is a system for high degree of accuracy, heavy load and big partial load. Accuracy and structural stiffness is technological key of system.

57. In order to develop U-joint spider bearings suitably used for heavy load and low speed motor vehicles, a steel back polyoxymethylene selfoiling compound material has been developed.

58. Because of heavy load and low peed of rotation, it is difficult for rock bit bearings to form a fluid ilm between the sliding surfaces, and, therefore, they may be in boundary lubrication.

59. Product introduction and purpose: X5032 vertical milling machine is a kind of strong metal cutting machine, the machine strong rigidity, wide range of speed in, can bear heavy load scraps.

60. Suitable for heavy load and severe condition , e . g. main shaft of CNC machine tool etc.